Aquarium Tips-How to make Aquarium

Aquarium Tips-How to make Aquarium

OK its Tutorial About Making Aquarium .I made my first Aquarium successfully and its working fine.No problem happened. For making Aquarium we will need some stuffs . Lets start

DIY project [Do it yourself]

Things we need

1. Glass panel:- Glass panel For Side 3x2 ,2 pieces of good mm and Quality,and For Base 3x1.5 ok now tricky part we have left two sides as all of us know Aquarium have four sides and one bottom two side .we have of 3x2  two glass panel and side must be 2 [its a height] x (lenght =[lenght-2x mm]), The mm is depth of Glass panel of front glass panel and we must reduce the MM ,we need space for both sides to properly sit on the bottom glass panel.
2. Silicon sealant : Silicon Sealant  only used to bond two glass panels,if you can find in Aquarium stores that awesome if not you can also use Any Glass Quality Silicon sealant.
3. Silicon Sealant Gun device : Its very important device. and very cheap ,It is used to Squeeze Silicon Sealant Tube , because its very painful to push the back part with only hands and hammer. i recommend it ,because that store keeper didn't tell me about it and i did it with my hands , very painful.
4. Tape : good Quality Tape big size
5. Table.
6. Bricks or Wood 4,5 to support Glass Panel walls.

Lets start the work it is recommended that two people must be in project. but if you don't have  and you are strong enough to move Glass panel u can do .i did it myself, but when this work was completed i need one more person to move my Aquarium to the desire place.

Step one ;- The The Bottom Glass panel size 3x1.5 put tapes in for directions like half of the tape must be on out and half should be fixed on the Glass panel.total 8 Tapes .

Step two:- Now Squeeze the Silicone Sealant using silicon Gun on the end layer of the Bottom Glass panels where we want to bond glass panels walls.

Step 5 :-PUT the back Glass panel Into squeezed silicon paste and Tape it from behind and Put the brick/wood behind the glass. careful for scratch.

Step 6 :-Now Squeeze the Silicone Sealant using silicon Gun on the end layer of the Back Glass panels where we want to bond glass panels walls.

Step7 :- Put the side Glass Panel Into the squeezed Silicone paste and Tape it from behind and Put the brick/wood behind the glass.

Step8 :- Put the Next side Glass Panel Repeat the same process.

Step 9:- Now Squeeze the Silicone Sealant using silicon Gun on the end layer of the Front Glass panels where we want to bond glass panels walls.

Step 10:- Now PUT the Front Glass panel Into squeezed silicon paste and Tape it from behind and Put the brick/wood behind the glass. careful for scratch.

Fill the two sides from outside and inside of glass Panel  area where there connected with silicon sealant.

Ok Done.hmm read on the label of your silicon sealant , how many days it need to completely dry , mine sealant need 10 days , so for 10 days i wait then i did water testing , 

Water testing is process in which we add water to the aquarium to see there is anykind of leakage. my Aquarium passed . then i leave the water for one week . the added my fishes.

I found this most cheaply method to make aquarium. The market price way too much to the making price. The money we save can be used to buy more fishes and plants .